Using E-Mail Over Webvpn - Cisco FirePOWER ASA 5500 series Configuration Manual

Chapter 37 Configuring WebVPN

Using E-Mail over WebVPN

WebVPN supports several ways to access e-mail. This section includes the following methods:
•
•
•
Configuring E-mail Proxies
WebVPN supports IMAP4S, POP3S, and SMTPS e-mail proxies.
globally to e-mail proxy users:
Table 37-3 WebVPN Attributes for E-mail Proxy Users
Function
Specifies the previously configured accounting
servers to use with e-mail proxy.
Specifies the authentication method(s) for e-mail
proxy users.
Specifies the previously configured
authentication servers to use with e-mail proxy.
Specifies the previously configured authorization
servers to use with WebVPN.
Requires users to authorize successfully to
connect.
Identifies the DN of the peer certificate to use as
a username for authorization.
Specifies the name of the group policy to use.
Enables e-mail proxy on the specified interface.
Defines the separator between the e-mail and
VPN usernames and passwords.
Configures the maximum number of outstanding
non-authenticated sessions.
Sets the port the e-mail proxy listens to.
OL-10088-01
Microsoft Outlook Web Access (OWA) 5.5
–
The Citrix Metaframe feature (if the PDA does not have the corresponding Citrix ICA client
–
software)
Configuring E-mail Proxies
Configuring MAPI
Configuring Web E-mail: MS Outlook Web Access
Command
accounting-server-group
authentication
authentication-server-group
authorization-server-group
authorization-required
authorization-dn-attributes
default-group-policy
enable
name-separator
outstanding
port
Table 37-3
Default Value
None
IMAP4S: Mailhost (required)
POP3S Mailhost (required)
SMTPS: AAA
LOCAL
None
Disabled
Primary attribute: CN
Secondary attribute: OU
DfltGrpPolicy
Disabled
":" (colon)
20
IMAP4S:993
POP3S: 995
SMTPS: 988
Cisco Security Appliance Command Line Configuration Guide
Using E-Mail over WebVPN
lists attributes that apply
1
37-25