Viewing Qos Configuration - Cisco FirePOWER ASA 5500 series Configuration Manual

Viewing QoS Configuration

Example 24-1 Configuring QoS Policing and Priority Queuing
hostname(config)# class-map TG1-voice
hostname(config-cmap)# description "This class-map matches all dscp ef traffic for tunnel-grp 1"
hostname(config-cmap)# match dscp ef
hostname(config-cmap)# match tunnel-group tunnel-grp1
hostname(config-cmap)# class-map TG1-BestEffort
hostname(config-cmap)# description "This class-map matches all best-effort traffic for tunnel-grp1"
hostname(config-cmap)# match tunnel-group tunnel-grp1
hostname(config-cmap)# match flow ip destination-address
hostname(config-cmap)# policy-map qos
hostname(config-pmap)# class TG1-voice
hostname(config-pmap-c)# priority
hostname(config-pmap-c)# class TG1-best-effort
hostname(config-pmap-c)# police output 200000 37500
hostname(config-pmap-c)# class class-default
hostname(config-pmap-c)# police output 1000000 37500
hostname(config-pmap-c)# service-policy qos interface outside
hostname(config)# priority-queue outside
hostname(config-priority-queue)# queue-limit 2048
hostname(config-priority-queue)# tx-ring-limit 256
Viewing QoS Configuration
This section contains the following topics:
•
•
Viewing QoS Service Policy Configuration
To view all current service policies, including those that implement QoS policy maps, use the show
service-policy command in privileged EXEC mode. You can limit the output to policies that include the
police or priority commands by using the police or priority keywords.
Note This is the same command you use to view priority and police statistics.
The following example shows the output of show service-policy with the police keyword:
hostname# show service-policy police
Global policy:
Interface outside:
Cisco Security Appliance Command Line Configuration Guide
24-12
Viewing QoS Policy Map Configuration, page 24-13
Viewing the Priority-Queue Configuration for an Interface, page 24-13
Service-policy: global_fw_policy
Service-policy: qos
Class-map: browse
police Interface outside:
cir 56000 bps, bc 10500 bytes
conformed 10065 packets, 12621510 bytes; actions: transmit
exceeded 499 packets, 625146 bytes; actions: drop
conformed 5600 bps, exceed 5016 bps
Chapter 24 Applying QoS Policies
OL-10088-01