A Installing And Replacing The Ssm; Installing And Replacing The 4Ge Ssm; Overview - Cisco ASA 5505 Hardware Installation Manual

Installing and Replacing the 4GE SSM

Overview

Figure A-1
Figure A-1
1
2
3
4
Figure A-1
Note
if you want to use this feature. For more information on SFP ports and modules, see the
Removing the SFP Modules" section on page
Table A-1
Table A-1
2, 7
3, 8
4
5
Cisco ASA 5500 Series Hardware Installation Guide
A-2
lists the 4GE SSM ports and LEDs.
4GE SSM Ports and LEDs
2 3
LNK 3 2 1 0 SPD
Cisco SSM-4GE
1 4
RJ-45 ports
RJ-45 Link LED
RJ-45 Speed LED
Power LED
shows SFP modules installed in the ports slots. You must order and install the SFP modules
describes the 4GE SSM LEDs.
4GE SSM LEDs
LED Color State
LINK Green Solid
Flashing
SPEED Off 10 MB
Green 100 MB
Amber 1000 MB (GigE)
POWER Green On
STATUS Green Flashing
Green Solid
Amber Solid
7 8
5
6
5
Status LED
6 SFP ports
7 SFP Link LED
8
SFP Speed LED
A-4.
Description
There is an Ethernet link.
There is Ethernet activity.
There is no network activity.
There is network activity at 100 Mbps.
There is network activity at 1000 Mbps.
The system has power.
The system is booting.
The system booted correctly.
The system diagnostics failed.
Appendix A Installing and Replacing the SSM
"Installing and
78-17374-01