ProSoft Technology inRax MVI69-101M User Manual page 99

Reference
Notice how the DF1 driver is opened, and the driver is looking for a processor
3
on node 1. If the network is being browsed, then you will not be able to stop
this driver. To stop the driver your RSWho screen should look like this:
Branches are displayed or hidden by clicking on the
When you have verified that the driver is not being browsed, go to
4
Communications>Configure Drivers
You may see something like this:
If you see the status as running, you will not be able to use this com port for
anything other than communication to the processor. To stop the driver press
the "Stop" on the side of the window:
After you have stopped the driver you will see the following:
5
ProSoft Technology, Inc.
February 4, 2008
MVI69-101M ♦ CompactLogix or MicroLogix Platform
IEC 60870-5-101 Master Communication Module
or the icons.
Page 99 of 133