Vii-1-9 Snmp - Draytek Vigor2860 User Manual

Send NTP Request
Through
Click OK to save these settings.
V I I - 1 - 9 S
V I I - 1 - 9 S
This page allows you to configure settings for SNMP and SNMPV3 services.
The SNMPv3 is more secure than SNMP through the encryption method (support AES and DES)
and authentication method (support MD5 and SHA) for the management needs.
Available settings are explained as follows:
Item
Enable SNMP Agent
Get Community
Set Community
480
Specify a WAN interface to send NTP request for time
synchronization.
N M P
N M P
Description
Check it to enable this function.
Set the name for getting community by typing a proper
character. The default setting is public.
The maximum length of the text is limited to 23 characters.
Set community by typing a proper name. The default setting
Vigor2860 Series User's Guide