Draytek Vigor2860 User Manual page 17

AN
1~6
Interface
Factory Reset
USB1~2 / USB
VDSL/ADSL
WAN2
GigaLAN (1-6)
PWR
ON/OFF
SIM Card Slot
N o t i f i c a t
N o t i f i c a
Magnetic antenna must be installed on the antenna socket before connecting to Vigor router.
Vigor2860 Series User's Guide
Blinking
Right On
LED
Off
Switch on Rear Side
Description
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or printer).
Connecter for accessing the Internet.
Connecter for local network devices or modem for accessing Internet.
Connecters for local network devices.
Connecter for a power adapter.
Power Switch.
Connector for a SIM card.
i o n s f o r A n t e n n a I n s
t i o n s f o r A n t e n n a I n s
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
(Available for Vigor2860L)
t a l l a t i o n ( f o r V i o g r 2 8
t a l l a t i o n ( f o r V i o g r 2 8
Extension
Base
6 0 L )
6 0 L )
3