Draytek Vigor2860 User Manual page 830

-S <d/s>
-V <1/2/3>
[...]
E E x x a a m m p p l
> qos class -c 2 -n draytek -a -m 1 -l 192.168.1.50:192.168.1.80
Following setting will set in the class2
class 2 name set to draytek
Add a rule in class2
Class2 the 1 rule enabled
Set local address type to Range, 192.168.1.50:192.168.1.80
T e l n e t C o m m
T e l n e t C o m m
This command allows user to configure protocol type and port number for QoS.
S y n t a x
S y n t a x
qos type [-a <service name> | -e <no> | -d <no>].
S y n t a x
S y n t a x
Parameter
-a <name>
-e <no>
-d <no>
-n <name>
-t <type>
-p <port>
-l
816
1:ANY 2:DNS 3:FTP 4:GRE 5:H.323
6:HTTP 7:HTTPS 8:IKE 9:IPSEC-AH 10:IPSEC-ESP
11:IRC 12:L2TP 13:NEWS 14:NFS 15:NNTP
16:PING 17:POP3 18:PPTP 19:REAL-AUDIO 20:RTSP
21:SFTP 22:SIP 23:SMTP 24:SNMP 25:SNMP-TRAPS
26:SQL-NET 27:SSH 28:SYSLOG 29:TELNET 30:TFTP
Show the content for specified DSCP ID/Service type.
Show the rule in the specified class.
It means that you can type in several commands in one line.
l e e
a n d : q o s t y p e
a n d : q o s t y p e
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to add rule.
It means to edit user defined service type. "no" means the index
number. Available numbers are 1~40.
It means to delete user defined service type. "no" means the index
number. Available numbers are 1~40.
It means the name of the service.
It means protocol type.
6:
17:
0:
<1~254>:
It means service port. The typing format must be [start:end] (ex.,
510:330).
List user defined types. "no" means the index number. Available
numbers are 1~40.
tcp(default)
udp
tcp/udp
other
Vigor2860 Series User's Guide