Snmp Setup - Draytek vigor2960 series User Manual

4 . 1 5 . 7 S N M P S e t u
4 . 1 5 . 7 S N M P S e t u
This page allows you to manage the settings for SNMP setup.
The SNMPv3 is more secure than SNMP through the encryption method (support AES and
DES) and authentication method (support MD5 and SHA) for the management needs.
Available parameters are listed as follows:
Item
Enable
Get Community
Set Community
Default Host IP/Mask
Notification Host IP
Enable SnmpV3
USM User
Auth Algorithm
Auth Password (Min.
Length:8)
Privacy Algorithm
Privacy Password(Min.
p
p
Description
Check the box to enable such profile.
Set the name for getting community by typing a proper
character. The default setting is public.
Set community by typing a proper name. The default setting
is private.
Click Enable to use the default IP and mask of the host as
the SNMP agent.
If you click Disable, you need to type the IP address and
choose the mask manually in related fields.
Type the IP address of the host for notification.
Click Enable to enable this function.
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Choose one of the encryption methods listed below as the
authentication algorithm.
Type a password for authentication. The maximum length of
the text is limited to 23 characters.
Choose one of the methods listed below as the privacy
algorithm.
Type a password for privacy. The maximum length of the
406
Vigor2960 Series User's Guide