Ii-1-4 Wan Budget; Ii-1-4-1 General Setup - Draytek Vigor2860 User Manual

I I - 1 - 4 W
I I - 1 - 4 W
This function is used to determine the data traffic volume for each WAN interface
respectively to prevent from overcharges for data transmission by the ISP. Please note that
the Quota Limit and Billing cycle day of month settings will need to be configured correctly
first in order for some period calculations to be performed correctly.
I I - 1 - 4 - 1 G
I I - 1 - 4 - 1 G
Click WAN1/WAN2/WAN3/WAN4 link to open the following web page.
Available settings are explained as follows:
Item
Enable
Quota Limit
When quota exceeded
Vigor2860 Series User's Guide
A N B u d g e t
A N B u d g e t
e n e r a l S e t u p
e n e r a l S e t u p
Description
Check the box to enable such function.
Type the data traffic quota allowed for such WAN interface.
There are two unit (MB and GB) offered for you to specify.
Check the box(es) as the condition(s) for the system to
perform when the traffic has exceeded the budget limit.
Shutdown WAN interface – All the outgoing traffic through
such WAN interface will be terminated.

Using Notification Object – The system will send out a
notification based on the content of the notification
131