Ii-1-1-3 Wan3/Wan4 (Usb) - Draytek Vigor2860 User Manual

After finished the above settings, click OK to save the settings.
I I - 1 - 1 - 3 W
I I - 1 - 1 - 3 W
To use 3G/4G network connection through 3G/4G USB Modem, please configure WAN3 or
WAN4 interface.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Line Speed (Kbps)
Active Mode
Vigor2860 Series User's Guide
tag; customer is used for inner tag.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
A N 3 / W A N 4 ( U S B )
A N 3 / W A N 4 ( U S B )
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
If your choose According to Line Speed as the Load Balance
Mode, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.
Choose Always On to make the WAN2 connection being
activated always.
75