Iii-1-4 Access Control - Draytek Vigor2860 User Manual

After finishing all the settings here, please click OK to save the configuration.
I I I - 1 - 4 A
I I I - 1 - 4 A
In the Access Control, the router may restrict wireless access to certain wireless clients only
by locking their MAC address into a black or white list. The user may block wireless clients by
inserting their MAC addresses into a black list, or only let them be able to connect by inserting
their MAC addresses into a white list.
In the Access Control web page, users may configure the white/black list modes used by each
SSID and the MAC addresses applied to their lists.
Available settings are explained as follows:
Item
Enable Mac Address Filter
274
such as ABCDEFGHIJKLM (or 26 hexadecimal digits leading by
0x, such as 0x4142434445464748494A4B4C4D).
All wireless devices must support the same WEP encryption
bit size and have the same key. Four keys can be entered
here, but only one key can be selected at a time. The keys
can be entered in ASCII or Hexadecimal. Check the key you
wish to use.
c c e s s C o n t r o l
c c e s s C o n t r o l
Description
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
Vigor2860 Series User's Guide