Ii-1-2-8 Details Page For Static Or Dynamic Ip In Wan2 (Physical Mode: Wireless 2.4G) - Draytek Vigor2860 User Manual

I I - 1 - 2 - 8 D
I I - 1 - 2 - 8 D
2 . 4 G )
2 . 4 G )
When Wireless 2.4G is selected as Physical Mode, WAN2 uses wireless station mode to access
Internet. The Router acts as a 2.4GHz wireless station and connects to the specific Wireless
AP.
To use Static or Dynamic IP as the accessing protocol of the internet, please select Static or
Dynamic IP from the WAN>>Internet Access>>WAN2 page. The following web page will be
shown.
Available settings are explained as follows:
Item
Enable/Disable
Obtain an IP address
automatically
Specify an IP address
WAN Connection
Detection
Vigor2860 Series User's Guide
e t a i l s P a g e f o r S t a t
e t a i l s P a g e f o r S t a t
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Click this radio button to obtain the IP address automatically
if you want to use Dynamic IP mode.
Click this radio button to specify dome data if you want to
use Static IP mode.
IP address - Type the IP address.
Subnet Mask - Type the subnet mask.
Gateway IP Address - Type the gateway IP address.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect, Ping Detect or Always On for
the system to execute for WAN detection. If you choose Ping
i c o r D y n a m i c I P i n
i c o r D y n a m i c I P i n
W A N 2 ( P h y s i c a l M o
W A N 2 ( P h y s i c a l M o
d e : W i r e l e s s
d e : W i r e l e s s
101