Draytek Vigor2860 User Manual page 60

Confirm Password
WAN IP Configuration
PPTP Server / L2TP
Server
Back
Next
Cancel
3. Please type in the IP address/mask/gateway information originally provided by your ISP.
Then click Next for viewing summary of such connection.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.
46
characters.
Retype the password.
Obtain an IP address automatically – The router will get an
IP address automatically from DHCP server.
Specify an IP address – You have to type relational settings
manually.
IP Address - Type the IP address.
Subnet Mask – Type the subnet mask.
Gateway – Type the IP address of the gateway.
Primary DNS – Type in the primary IP address for the router.
Second DNS – Type in secondary IP address for necessity in
the future.
Type the IP address of the server.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
Vigor2860 Series User's Guide