Draytek Vigor2860 User Manual page 537

Confirm Password
Idle Timeout
Max User Login
Policy
External Service
Authentication
Log
Vigor2860 Series User's Guide
authentication, he/she can access Internet via this router
with the limitation configured in this user profile.
The maximum length of the password you can set is 24
characters.
Type the password again for confirmation.
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 10 minutes.
Such profile can be used by many users. You can set the
limitation for the number of users accessing Internet with
the conditions of such profile. The default setting is 0 which
means no limitation in the number of users.
It is available only when User-Based mode selected in User
Management>>General Setup.
Default – If you choose such item, the filter rules
pre-configured in Firewall can be adopted for such user
profile.
Create New Policy – If you choose such item, the following
page will be popped up for you to define another filter rule
as a new policy.
For the detailed configuration, simply refer to
Firewall>>Filter Rule. The firewall filter rules that are not
selected in Firewall>>General>>Default rule can be
available for use in User Management>>User Profile.
The router will authenticate the dial-in user by itself or by
external service such as LDAP server or Radius server or
TACACS+ server. If LDAP, Radius or TACACS+ is selected
here, it is not necessary to configure the password setting
above.
Time of login/log out, block/unblock for the user(s) can be
sent to and displayed in Syslog. Please choose any one of the
log items to take down relational records for the user(s).
523