Snmp Setup - Draytek Vigor2960 series User Manual

Allow Ping from WAN
Allow Ping form LAN
Apply
Cancel
4 . 1 2 . 7 S N M P S e t u p
4 . 1 2 . 7 S N M P S e t u p
This page allows you to manage the settings for SNMP setup.
Available parameters are listed as follows:
Item
Enable This Profile
Get Community
Set Community
Manager Host IP
Apply
Cancel
The former box indicates an IP address allowed to login to the
router, and the later box indicates a subnet mask allowed to
login to the router.
Click Enable to allow system administrator to ping the router
from WAN interface.
Click Enable to allow system administrator to ping the router
from LAN interface.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
Description
Check the box to enable such profile.
Set the name for getting community by typing a proper
character. The default setting is public.
Set community by typing a proper name. The default setting
is private.
Type the IP address for the manager host.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
256 Vigor2960 Series User's Guide