Draytek Vigor2860 User Manual page 817

-s INVERT
-a TYPE
[START_IP]
[END/MASK_IP]
E x a m p l
E x a m p
> object ip obj 1 -n marketing
> object ip obj 1 -a 1 192.168.1.45
> object ip obj 1 -v
IP Object Profile 1
Name
Interface:[Any]
Address type:[single]
Start ip address:[192.168.1.45]
End/Mask ip address:[0.0.0.0]
Invert Selection:[0]
T e l n e t C o m m
T e l n e t C o m m
This command is used to integrate several IP objects under an IP group profile.
S y n t a x
S y n t a x
object ip grp setdefault
object ip grp INDEX -v
object ip grp INDEX -n NAME
object ip grp INDEX -i INTERFACE
object ip grp INDEX -a IP_OBJ_INDEX
S y n t a x
S y n t a x
Parameter
setdefault
INDEX
-v
-n NAME
-i INTERFACE
Vigor2860 Series User's Guide
It means to set invert seletion for the object profile.
INVERT=0, means disableing the function.
INVERT=1, means enabling the function.
Example:
It means to set the address type and IP for the IP object profile.
TYPE=0, means Mask
TYPE=1, means Single
TYPE=2, means Any
TYPE=3, means Rang
Example:
When the TYPE is set with 2, you have to type an IP address as a
starting point and another IP address as end point.
Type an IP address.
Type an IP address (different with START_IP) as the end IP address.
e
l e
:[marketing]
a n d : o b j e c t i p g r p
a n d : o b j e c t i p g r
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified group profile.
It means to view the information of the specified group profile.
Example:
It means to define a name for the IP group.
NAME: Type a name with less than 15 characters.
Example:
It means to define an interface for the IP group.
object ip obj 3 -s 1
object ip obj 3 -a 2
p
object ip grp 1 -v
object ip grp 8 -n bruce
803