Priority
3.
When you finish the configuration, please click OK to save and exit this page.
I
I
-
5
-
2
-
2
D
I
I
-
5
-
2
-
2
D
With the analysis done by such page, possible path (static route, routing table or policy
route) of the packets sent out of the router can be traced.
or
Vigor2860 Series User's Guide
automatically when the selected interface (defined in Send
via if criteria matched) is down.
Packets will be transmitted based on all routes or Route
Policy. Vigor router will determine which rule will be
adopted for transmitting the packet according to the
priority of Static Route and Route Policy.
The greater the value is, the lower the priority is. Default
value for route policy is "200" which means it has higher
priority than the default route.
i
a
g
n
o
s
e
i
a
g
n
o
s
e
WAN/LAN – Use the drop down list to choose an
interface as an auto failover interface.
VPN – Use the drop down list to choose a VPN tunnel as
a failover tunnel.
Route Policy – Use the drop down list to choose an
existed route policy profile.
Gateway – Specific gateway is used only when you
want to forward the packets to the desired gateway.
Usually, Default Gateway is selected in default.
235