Draytek Vigor2860 User Manual page 880

-d [enable]
-s [id]
-h [enable]
-u [mode]
-z [enable]
-n [enable]
-m [sec]
-R [min,max]
-8 [enable]
-v
voip sip misc - Allows users to set miscellaneous settings for the device.
-c [enable]
-s [enable]
-e [enable]
-h [enable]
-i [enable]
-p [enable]
-P [enable]
-H [enable]
-t [val]
866
Enable / disable the function of DND (Do Not Disturb)
0 – disable
1 - enable
Indicate DND schedule.
Id - s1, s2, s3, s4 (max. 4 schedule)
Enable / disable the function of calling line identification
restriction (CLIR).
0 – disable
1 - enable
Set CLIR mode.
0 - means "draft-ietf-sip-privacy"
1 – means "rfc 3323/3325)"
Enable / disable playing dial tone when registered on sip server.
0 – disable
1 - enable
Enable / disable session timer.
0 – disable
1 - enable
Set the value for session timer (unit: sec).
Set the flash hook time range 100~2000 (unit: ms).
Enable or disable T.38 fax relay feature.
0 – disable
1 - enable
View current settings.
Enable compact header to shorten the packet (0: disable, 1:
enable).
Change "#" into digit number.
0 - disable
1 - enable
Enable Europe style flash hook operation mode.
0 - disable
1 - enable
Enable/disable call hold mode based on protocol RFC2543 (0:
disable, 1:enable).
Enable CODEC change without Re-INVITE.
0 - disable
1 - enable
Enable PRACK message.
0 – Not support PRACK.
1 – Support PRACK.
Enable IP Call.
0 – Disable IP call.
1 – Enable IP call.
SIP INFO packet will be sent out when encounting hook flash event.
0 - disable
1 - enable
Set the mode of User-Agent (e.g., phone, software, and device) for
Vigor2860 Series User's Guide