Iii-1-8 Station Control - Draytek Vigor2860 User Manual

Country Code
After finishing all the settings here, please click OK to save the configuration.
I I I - 1 - 8 S
I I I - 1 - 8 S
Station Control is used to specify the duration for the wireless client to connect and
reconnect Vigor router. If such function is not enabled, the wireless client can connect Vigor
router until the router shuts down.
Such feature is especially useful for free Wi-Fi service. For example, a coffee shop offers free
Wi-Fi service for its guests for one hour every day. Then, the connection time can be set as "1
hour" and reconnection time can be set as "1 day". Thus, the guest can finish his job within
one hour and will not occupy the wireless network for a long time.
Available settings are explained as follows:
Item
SSID
Enable
Connection Time /
Reconnection Time
Display All Station Control
List
Hotspot Web Portal
After finishing all the settings here, please click OK to save the configuration.
284
t a t i o n C o n t r o l
t a t i o n C o n t r o l
don't know what it is, default value is 2347.
Vigor router broadcasts country codes by following the
802.11d standard. However, some wireless stations will
detect / scan the country code to prevent conflict occurred.
If conflict is detected, wireless station will be warned and is
unable to make network connection. Therefore, changing
the country code to ensure successful network connection
will be necessary for some clients.
Description
Display the SSID that the wireless station will use it to
connect with Vigor router.
Check the box to enable the station control function.
Use the drop down list to choose the duration for the
wireless client connecting /reconnecting to Vigor router. Or,
type the duration manually when you choose User defined.
All the wireless stations connecting to Vigor router by using
such SSID will be listed on Station Control List.
Click it to access in to Hotspot Web Portal page for
modifying the settings if required.
Vigor2860 Series User's Guide