Snmp Setup - Draytek vigor3900 User Manual

User Define
Allow Ping from WAN
Block LAN Profile
Allow Ping form LAN
Apply
Cancel
4 . 1 4 . 7 S N M P S e t u p
4 . 1 4 . 7 S N M P S e t u p
This page allows you to manage the settings for SNMP setup.
Available parameters are listed as follows:
Item
Enable
Get Community
Set Community
Click Enable to allow system administrator to login from the
user defined IP address and management the web page of the
router. If you enable such function, the system can be
managed by these three IP addresses via WAN.
Allowed IP1 - Allowed IP3 - Type the first IP address for
the system administrator to login.
The former box indicates an IP address allowed to login to the
router, and the later box indicates a subnet mask allowed to
login to the router.
Click Enable to allow system administrator to ping the router
from WAN interface.
Choose the LAN profile(s) that the IPs controlled under such
profile will be blocked by Vigor3900.
Click Enable to allow system administrator to ping the router
from LAN interface.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
Description
Check the box to enable such profile.
Set the name for getting community by typing a proper
character. The default setting is public.
Set community by typing a proper name. The default setting
362 Vigor3900 Series User's Guide