Draytek Vigor2860 User Manual page 149

Info
2. In the following figure, use the drop down list to choose a proper connection type.
Different connection types will bring out different configuration page. Refer to the
following:

PPP – Dual Stack application, IPv4 and IPv6 services can be utilized at the same time
Choose PPP and type the information for PPPoE of IPv4.
Access into the setting page for IPv6 service, it is not necessary for you to configure
anything.
Click OK and open Online Status. If the connection is successful, you will get the IP
address for IPv4 and IPv6 at the same time.
Vigor2860 Series User's Guide
Only one WAN interface support IPv6 service at one time. In this
example, WAN2 is chosen as the one supporting IPv6 service.
135