Draytek Vigor2860 User Manual page 422

Action
CSM
Move Up/Down
Next Filter Set
Wizard Mode
Advance Mode
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click Index 1. The setting page will appear as follows:
Available settings are explained as follows:
Item
Comments
Direction
Source/Destination IP
Protocol
408
Display the packets to be passed /blocked.
Display the content security managed
Use Up or Down link to move the order of the filter rules.
Set the link to the next filter set to be executed after the
current filter run. Do not make a loop with many filter sets.
Allow to configure frequently used settings for filter rule via
several setting pages.
Allow to configure detailed settings of filter rule.
Description
Enter filter set comments/description. Maximum length is
14- character long.
Set the direction of packet flow. It is for Data Filter only.
For the Call Filter, this setting is not available since Call
Filter is only applied to outgoing traffic.
Note: RT means routing domain for 2nd subnet or other
LAN.
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address as
the Address Type and type them in this dialog.
Specify the protocol(s) which this filter rule will apply to.
Vigor2860 Series User's Guide