Ii-1-2-4 Details Page For Mpoa/Static Or Dynamic Ip In Wan1 (Physical Mode: Adsl) .89 Ii-1-2-5 Details Page For Pppoe In Wan2 (Physical Mode: Ethernet) - Draytek Vigor2860 User Manual

DNS Server IP Address
After finishing all the settings here, please click OK to activate them.
I I - 1 - 2 - 5 D
I I - 1 - 2 - 5 D
To choose PPPoE as the accessing protocol of the Internet, please select PPPoE from the
WAN>>Internet Access >>WAN2 page. The following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
ISP Access Setup
Vigor2860 Series User's Guide
router manually.
Type in the primary IP address for the router. If necessary,
type in secondary IP address for necessity in the future.
e t a i l s P a g e f o r P P P o
e t a i l s P a g e f o r P P P o
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Service Name (Optional) - Enter the description of the
specific network service.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
characters.
Password – Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
E i n W A N 2 ( P h y s i c a
E i n W A N 2 ( P h y s i c a
l M o d e : E t h e r n e t )
l M o d e : E t h e r n e t )
93