Process Cautions - Siemens Pointek CLS200 Digital Operating Instructions Manual

Wall Restriction

Process Cautions

• The maximum
allowable torque on a
horizontally installed
rod is 15 Nm.
• Keep unit out of path
of falling material, or
protect probe from
falling material.
• Consider material
surface configuration
when installing unit.
• Tensile load must not
exceed probe or
vessel rating.
Page 22 Pointek CLS200/300 Digital – OPERATING INSTRUCTIONS
50 mm (2")
50 mm (2") min
min
500 mm
(20") min
7ML19985JJ03