Functions
The device menu gives you access to the following functions:
•
Upload from/Download to the device
•
Set Address
•
Master Reset
•
Write Locking
•
Sensor Test
•
Simulation
•
Condensed Status Setup
Changing parameter settings
Initial setup can be carried out prior to mounting into the process, but it is
Note:
extremely important to calibrate the unit and adjust the sensitivity on the product itself.
•
First launch SIMATIC PDM, connect to Pointek CLS200/300, and upload data from
the device (the status fields change to Loaded).
•
Adjust parameter values in the parameter value field.
•
After adjusting the value, press Enter (the status fields read Changed).
•
When you have completed the adjustments, open the menu Device – Download
data to Device then go to File – Save to save parameter settings offline (the status
fields are cleared).
Page 64
Pointek CLS200/300 Digital – OPERATING INSTRUCTIONS
value
column
7ML19985JJ03