Process Conditions; Safety Guidelines; Maintenance - Siemens Pointek CLS100 Instructions Manual

Process Conditions

• dielectric constant (εr):
• temperature:
• pressure (vessel):
Approvals
• CSA
• ATEX
• PED 97/23/EC
• Vlarem
Note:
See Appendix for CE Approval Declaration

Safety Guidelines

Warning notices must be observed to ensure personal safety as well
as that of others, and to protect the product and the connected
equipment. Warning notices are accompanied by a clarification of the
level of caution to be observed.
This product can only function properly and safely if it is correctly
transported, stored, installed, set up, operated, and maintained.

Maintenance

The Pointek CLS 100 requires no maintenance or cleaning.
1.
Pressure approval pending in Canada.
7ML19985QJ81
1.5 minimum
–40 to 100 °C (–40 to 212 °F)
–1 to 10 bar (146 psi) gauge, nominal
• FM
• WHG/VbF overfill protection (Germany)
• Lloyd's Register of Shipping, categories ENV1,
ENV2, and ENV5
Pointek CLS 100 – QUICK START MANUAL
1
Page EN-3