Sensor Test - Siemens Pointek CLS200 Digital Operating Instructions Manual

Pointek
CLS300
Active
Shield
active
measurement
section
The relative lengths of the measurement section and Active Shield section can be
specified to suit a particular application. If the measured range will be short relative to
the total length of the electrode, specify a short measurement section. This increases the
achievable resolution of the measurement, since any change in level will be greater
relative to the length of the measurement section.
The powder-coated aluminum enclosure provides reliable operation in environments with
dust, moisture, and high-frequency interference.

Sensor Test

You can initialize a sensor test by activating the reed contact with a magnet
the housing. For details, see
1.
A test magnet will be supplied with the instrument.
Page 76 Pointek CLS200/300 Digital – OPERATING INSTRUCTIONS
full
empty
tank
tank
Magnet-activated sensor test
100%
buffer
≈
frequency (f)
capacitance (C)
0%
1
from outside
, on page 36.
7ML19985JJ03
K