View Logbook - ABB AX410 User Manual

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456

3.5 View Logbook

Note. The View Logbook function is available only if the option board is fitted and analog features enabled (Section 7.3) and
is set to On (Section 5.10).
Logbook
-----
VIEW LOGBOOK
Cals
Power
Errors
Alarms
-----
VIEW LOGBOOK
A1
1
On
-----
05:02:04 09:54
VIEW CLOCK
SENSOR CAL.
SECURITY CODE
CONFIG. DISPLAY
IM/AX4CO Issue 11
The logbook stores data entries for alarm events, sensor errors, power failures and
sensor calibrations.
View Logbook
Use the and
Note. If no entries are stored in the
Entries.
Alarms
The Alarms logbook contains up to 10 entries (entry 1 is the most recent), each
comprising an alarm number, alarm state (On or Off), and the date/time of the
occurrence.
Option board fitted and analog features enabled (Section 7.3) - see section 3.6, page
16.
set to
Enable Cals.
set to
Enable Cals.
see section 5.1, page 19.
set to
Enable Cals.
section 5.2, page 20.
Advance to entries 2 to 10.
2 A1
Note. If no more entries are stored, the display shows No More Entries.
keys to access the
logbook, the display shows No More
Alarms
(Section 5.3) - see section 4.1, page 17.
Yes
(Section 5.3) and
No Alter Sec. Code
(Section 5.3) and
No Alter Sec. Code
3 OPERATOR VIEWS
logbook.
Alarms
not set to zero (Section 5.9) -
set to zero (Section 5.9) - see
13