ABB AX410 User Manual page 67

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456
5000
uS/cm
5000
Calib
A:Res.Span(20R)
5014
uS/cm
5014
Calib
A: Self Checking
100. 0
Ohms
100. 0
Calib
A:T.Zero (100R)
150. 0
Ohms
150. 0
Calib
A:T.Span (150R)
1000
Ohms
1000
Calib
A:T.Zero (1K0)
1500
Ohms
1500
Calib
A:T.Span (1K5)
Cal. Sensor A
No
----- Yes
A: Abort Cal.
IM/AX4CO Issue 11
Resistance Span (20R)
Set the cell simulator to 20Ω.
The display advances automatically to the next step once a stable and valid value is
recorded.
Self Checking
The analyzer calibrates the internal reference resistance automatically to compensate
for changes in ambient temperatures.
The display advances automatically to the next step once a stable and valid value is
recorded.
Temperature Zero (100R)
Set the temperature simulator to 100Ω.
The display advances automatically to the next step once a stable and valid value is
recorded.
Temperature Span (150R)
Set the temperature simulator to 150Ω.
The display advances automatically to the next step once a stable and valid value is
recorded.
Temperature Zero (1k0)
Set the temperature simulator to 1kΩ.
The display advances automatically to the next step once a stable and valid value is
recorded.
Temperature Span (1k5)
Set the temperature simulator to 1.5kΩ.
The display returns automatically to
recorded.
Abort Calibration
Select or
Yes No
selected:
Yes
- before completion of
A:T.Zero (100R)
and continues.
- after completion of
CAL. SENSOR A
page.
A
No selected - calibration continues from the point at which the
Cal. Sensor A
frame - calibration advances to
A: Self Checking
frame - the display returns to the
A: Self Checking
7 CALIBRATION
once a stable and valid value is
A:T.Zero (100R)
Calibrate Sensor
key was pressed.
65