Configure Clock - ABB AX410 User Manual

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456

5.7 Configure Clock

Note. The Configure Clock function is available only if the option board is fitted and analog features enabled - see section 7.3,
page 62.
-----
CONFIG. CLOCK
-----
Set Clock?
-----
mm:dd:yy
dd:mm:yy
Format
Set
----- Day
Date 05:02:04
Set
----- Hours
Time 12:00
-----
Press To Set
Press To Abort
Set Clock?
IM/AX4CO Issue 11
Set Clock
Set the system clock.
Return to main menu.
CONFIG. CLOCK
Option board fitted and Serial Communications feature enabled (Section 7.3) - see
CONFIG. SERIAL
Supplementary Manual PROFIBUS Datalink Description (IM/PROBUS).
Single input analyzer and option board not fitted - see section 5.8, page 42.
CONFIG. CONTROL
Dual input analyzer and option board not fitted - see section 5.9, page 47.
CONFIG. SECURITY
Date Format
Select the required date format.
Date
Set the date in the format selected above.
Press to move between the day, month and year fields.
Use the
Time
Set the time in the form hh:mm.
Press to move between the hours and minutes fields.
Use the
Press to Set
line.
Press the appropriate key to set the clock or abort the changes.
and keys to adjust each field.
and keys to adjust each field.
and
Press to Abort
5 PROGRAMMING
are shown alternately on the lower display
41