ABB AX410 User Manual page 38

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456
100. 0
uS/cm
0. 0 00
uS/cm
AO1: Span Value
100. 0
uS/cm
0. 0 00
uS/cm
AO1: Zero Value
10. 0 0
uS/cm
12. 0 0
mA
AO1: Set X Value
10. 0 0 uS/cm
12. 0 0
mA
AO1: Set Y Value
36
Span Value
and
uS/cm Adjust
keys to adjust the displayed reading to the required span value. This is Point A in
Fig. 5.6.
Zero value.
Zero Value
Span value.
and
uS/cm Adjust
keys to adjust the displayed reading to the required zero value. This is Point D in
Fig. 5.6.
Note. Applicable only if the
page. When set to
Set Breakpoint X Value
and
uS/cm Adjust
keys to adjust the displayed reading to the required breakpoint conductivity
value. This is Point B in Fig. 5.6.
Current value at which the breakpoint occurs.
Note. Applicable only if the
Set Breakpoint Y Value
Conductivity value at which the breakpoint occurs.
and
mA Adjust
keys to adjust the displayed reading to the required breakpoint current value.
This is Point C in Fig. 5.6.
Note. Applicable only if the
Continued on next page.
A01: Default O/P
are shown alternately on the upper display line. Use the
are shown alternately on the center display line. Use the
parameter is set to
Curve
and , the zero value is set automatically.
Log. 2 Log. 3
are shown alternately on the upper display line. Use the
parameter is set to
Curve
are shown alternately on the center display line. Use the
parameter is set to
Curve
5 PROGRAMMING
or - see previous
Linear Bi-Lin
- see previous page.
Bi-Lin
and
- see previous page.
Bi-Lin
IM/AX4CO Issue 11
and
and
and