Configure Control - ABB AX410 User Manual

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456

5.8 Configure Control

Note.
PID control is applicable only to single input analyzers.
Before configuring the PID controller, refer to see appendix B on page 78 for further information.
-----
CONFIG. CONTROL
PID
-----
Off
Controller
42
Controller Type
Select the controller type:
Off
PID
set to
Controller
PID Controller
See Section 5.9.
CONFIG. SECURITY
- Disables the controller
- Single PID controller
- see section 5.8.1, page 43.
PID
5 PROGRAMMING
IM/AX4CO Issue 11