ABB AX410 User Manual page 16

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456
Alarms
Cals
Power
----- Errors Errors
VIEW LOGBOOK
1 Sen.A
-----
Pt100
05:02:04 11:34
VIEW CLOCK
SENSOR CAL.
SECURITY CODE
CONFIG. DISPLAY
Errors
Alarms
Cals
Power
-----
VIEW LOGBOOK
1
Off
-----
05:02:04 11:34
VIEW CLOCK
SENSOR CAL.
SECURITY CODE
CONFIG. DISPLAY
14
View Logbook
Use the and
Note. If no entries are stored in the
Errors
The logbook contains up to 5 entries (entry 1 is the most recent), each comprising the
Errors
sensor letter, error number and the date/time of the occurrence.
Option board fitted and analog features enabled (Section 7.3) - see section 3.6, page 16.
set to
Enable Cals.
set to
Enable Cals.
section 5.1, page 19.
set to
Enable Cals.
5.2, page 20.
Advance to entries 2 to 5.
2 Sen.A
Note. If no more entries are stored, the display shows No More Entries.
View Logbook
Use the and
Note. If no entries are stored in the
Power
The logbook contains up to 2 entries (entry 1 is the most recent), each comprising the
Power
power state (On or Off) and the date/time of the occurrence.
Option board fitted and analog features enabled (Section 7.3) - see section 3.6, page 16.
set to
Enable Cals.
set to
Enable Cals.
section 5.1, page 19.
set to
Enable Cals.
5.2, page 20.
Advance to entry 2.
2
Note. If no more entries are stored, the display shows No More Entries.
keys to access the
logbook, the display shows No More Entries.
Errors
(Section 5.3) - see section 4.1, page 17.
Yes
(Section 5.3) and
No Alter Sec. Code
(Section 5.3) and
No Alter Sec. Code
keys to access the
logbook, the display shows No More Entries.
Power
(Section 5.3) - see section 4.1, page 17.
Yes
(Section 5.3) and
No Alter Sec. Code
(Section 5.3) and
No Alter Sec. Code
3 OPERATOR VIEWS
logbook.
Errors
not set to zero (Section 5.9) - see
set to zero (Section 5.9) - see section
logbook.
Power
not set to zero (Section 5.9) - see
set to zero (Section 5.9) - see section
IM/AX4CO Issue 11