View Logbook - ABB AX416 User Manual

Single and Dual Input Analyzers for pH/Redox (ORP)
AX416, AX436, AX460, AX466 & AX468

3.5 View Logbook

Note. The View Logbook function is available only if the option board is fitted and analog features enabled (see section 7.3, page
58) and is set to
Logbook
-----
VIEW LOGBOOK
Cals
Power
Errors
Alarms
-----
VIEW LOGBOOK
A1
1
On
-----
11:09:02 12:34
Alarms
Cals
Power
Errors Errors
-----
VIEW LOGBOOK
Sen.A
1
Pt100
-----
11:09:02 12:34
16
(see section 5.9, page 41).
On
The logbook stores data entries for alarm events, sensor errors, power failures and pH
calibration information.
View Logbook
Use the
Note. If no entries are stored in the Alarms logbook, the display shows
Alarms
The
Alarms
comprising an alarm number, alarm state (On or Off) and the date/time of the
occurrence.
Option board fitted and analog features enabled (Section 7.3) - see section 3.6, page
VIEW CLOCK
18.
SENSOR CAL.
Security Code
See Note on Page 13.
CONFIG. DISPLAY
A1
Advance to entries 2 to 10.
2
Note. If no more entries are stored, the display shows
View Logbook
Use the
Note. If no entries are stored in the
Errors
The logbook contains up to 5 entries (entry 1 is the most recent), each
Errors
comprising the sensor letter, error number and the date/time of the occurrence.
Option board fitted and analog features enabled (Section 7.3) - see section 3.6, page
VIEW CLOCK
18.
SENSOR CAL.
Security Code See Note on Page 13.
CONFIG. DISPLAY
Sen.A
2 Advance to entries 2 to 5.
Note. If no more entries are stored, the display shows
and keys to access the
logbook contains up to 10 entries (entry 1 is the most recent), each
and keys to access the
Errors
3 OPERATOR VIEWS
logbook.
Alarms
.
No More Entries
logbook.
Errors
logbook, the display shows
.
No More Entries
IM/AX4PH
.
No More Entries
.
No More Entries
Issue 9