CyberData 011405 Operation Manual page 70

Web Page Item
5-9
Dot
Audio Test
Enter Code
Invalid Code
Page Tone
Your IP Address is
Rebooting
Restoring Default
Ring Tone
Sensor Triggered
Night Ring
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Table 2-22. Audiofiles Configuration Parameters (continued)
Description
The name of the audio configuration option is the same as the spoken audio that plays on
the board (24 character limit).
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker test message..." (24
character limit)
Corresponds to the message "Enter Code" (24 character limit).
Corresponds to the message "Invalid Code" (24 character limit).
Corresponds to a simple tone used for beep on initialization and beep on page (24 character
limit).
Corresponds to the message "Your IP address is..." (24 character limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
Corresponds to the message "Restoring default" (24 character limit).
This is the tone that plays when set to ring when receiving a call (24 character limit).
Corresponds to the message "Sensor Triggered" (24 character limit).
Specifies the ringtone for nightring. By default this parameter uses the same audio file that is
selected for the Ring Tone parameter.
Click on the Browse button to navigate to and select an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and restore the stock audio file.
The Save button will download a new user audio file to the board once you've selected the
file by using the Browse button. The Save button will delete any pre-existing user-uploaded
audio files.
931236C
SIP Loudspeaker Amplifier (PoE) Setup
Configure the Audio Configuration Parameters
CyberData Corporation
63