CyberData 011405 Operation Manual page 43

Web Page Item
RGB Strobe
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Table 2-11. Device Configuration Parameters (continued)
Note You can change the
without rebooting the device. You must save and reboot the device for other changes to take
effect.
Description
Status of optional RGB Strobe.
Click on the Test Audio button to do an audio test. When the Test Audio
button is pressed, you will hear a voice message for testing the device
audio quality and volume.
Click on the Test Relay button to do a relay test.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the
web page items. First click on the Toggle Help button, and you will see a
question mark ( ) appear next to some of the web page items. Move the
mouse pointer to hover over a question mark to see a short description of
a specific web page item.
SIP Volume, Multicast Volume,
931236C
SIP Loudspeaker Amplifier (PoE) Setup
Configure the Device
Ring Volume, and Sensor Volume
CyberData Corporation
36