CyberData 011405 Operation Manual page 54

Web Page Item
Fast Fade
Slow Blink
Fast Blink
SIP Call Color
Red
Green
Blue
MWI Strobe Settings
Blink Strobe on MWI
MWI Strobe Brightness
ADA Compliant
Slow Fade
Fast Fade
Slow Blink
Fast Blink
MWI Call Color
Red
Green
Blue
Nightringer Settings
Enable Nightringer
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Table 2-17. SIP Configuration Parameters (continued)
Description
Strobe will increase in brightness from 0 to the specified brightness and
back to 0 over the course of about 1.5 seconds during the duration of the
event.
Strobe will blink ON at the specified brightness for one second then OFF
for one second during the duration of the event.
Strobe will blink ON at the specified brightness then OFF five times per
second during the duration of the event.
Select desired color (only one may be chosen).
The red LED value for SIP Call.
The green LED value for SIP Call.
The blue LED value for SIP Call.
Use this button to preview the strobe flashing behavior for the MWI Strobe
Settings.
When selected, the strobe will blink a scene when a voicemail is waiting
for its extension.
How bright the strobe will blink when there is a message waiting. This is
the maximum brightness for "fade" type scenes.
Strobe will blink ON at the specified brightness for 150ms then OFF for
350ms during the duration of the event.
Strobe will increase in brightness from 0 to the specified brightness and
back to 0 over the course of about 3.5 seconds during the duration of the
event.
Strobe will increase in brightness from 0 to the specified brightness and
back to 0 over the course of about 1.5 seconds during the duration of the
event.
Strobe will blink ON at the specified brightness for one second then OFF
for one second during the duration of the event.
Strobe will blink ON at the specified brightness then OFF five times per
second during the duration of the event.
Select desired color (only one may be chosen).
The red LED value for MWI.
The green LED value for MWI.
The blue LED value for MWI.
Use this button to preview the strobe flashing behavior for the MWI Strobe
Settings.
When Nightringer is enabled, the device will attempt to register a second
extension with the SIP server. Any calls made to this extension will play a
ringtone (corresponds to Night Ring on the Audiofiles page). By design,
it is not possible to answer a call to the Nightringer extension.
931236C
SIP Loudspeaker Amplifier (PoE) Setup
Configure the SIP (Session Initiation Protocol) Parameters
CyberData Corporation
47