Sleep Mode - Fujitsu ARROWS NX F-01K Instruction Manual

◆ Panel switch
Flick the status bar downward with two fingers to open the
Panel switch. Tap the panel switch to switch ON/OFF of the
function or setting.
1
Flick the status bar down with two fingers
e
f
a User
Add or switch user/guest.→P145
b Edit
Touch and hold the panel switch and then drag it to delete
or add. To reset the edited content,
[Reset].
c Settings
Display the settings menu.→P126
d Close the Panel switch
Close the Panel switch and display the Notification panel.→
P52
ab cd
g
h
in the edit screen→
e Panel switches
Tap each panel switch to ON/OFF of the function or setting.
Touch and hold the panel switch to open the corresponding
setting menu.
f Notification→P52
g Screen brightness level
Slide the slider to adjust the brightness.
h Indicator
Indicates the number of Panel switch pages and the which
page you are in.
✔INFORMATION
･
To close the Panel switch, flick the Panel switch upward or tap
(Back).
･
ON/OFF operation of NFC in the Panel switch is unavailable
while charging because the NFC is disabled.

◆ Sleep mode

When the sleep mode is set, the screen backlight turns off so
that you can avoid misoperations of the touch panel and lock
the screen. You can also reduce battery consumption.
P
1
✔INFORMATION
･
When no operation is performed in a certain period of time,
the screen automatically turns off according to the settings of
[Screen timeout] (→P138) and the terminal turns into sleep
mode.
･
When receiving a call in sleep mode, sleep mode is
deactivated.
53
Before using the terminal