Data Usage - Fujitsu ARROWS NX F-01K Instruction Manual

Data usage

Check the data usage amount or make settings for the cellular
data communication.
1
From the Home screen,
usage]
2
Set each item
Usage : Mobile data usage for the period specified in
"Billing cycle" is displayed.
Data saver : Restrict the background data communication
of applications. To set applications not to restrict the data
communication, tap [Unrestricted data access].
Cellular data : Setting steps→P132
Cellular data usage : Cellular data usage for the period
specified in "Billing cycle" is displayed in a graph. Also,
cellular data usage amount per application can be
checked.
Billing cycle : Setting steps→P132
Wi-Fi data usage : Wi-Fi data usage is displayed in a
graph. Also, Wi-Fi data usage amount per application can
be checked.
Network restrictions : Set to restrict usage of the specified
Wi-Fi network.
◆ Cellular data
Enable the Internet access via cellular network.
1
From the Home screen,
usage]→Turn [Cellular data] to ON
→[Settings]→[Data
→[Settings]→[Data
132
◆ Setting a billing cycle
Set a billing cycle (measuring period), a data amount for
warning, or an upper limit of data usage.
1
From the Home screen,
usage]→[Billing cycle]
2
Set each item
✔INFORMATION
･
The displayed data amount is an estimation. To check the
actual data usage amount, refer to "My docomo".
･
If the data usage reaches to the specified upper limit, the
notification screen indicating that the cellular data
communication is paused appears. To resume the cellular
data communication, tap [RESUME].
→[Settings]→[Data
Settings