Qr Code Reader - Fujitsu ARROWS NX F-01K Instruction Manual

■ HDR mode (unavailable for HighSpeedVideo)
Set to adjust contrasting of screen for video with crushed
blacks reduced even in backlight.
■ Steady Video (unavailable for HighSpeedVideo)
Set whether to use Steady Video.
･
Enabling the Steady Video function makes the shooting
range narrower.
･
When the picture size is set to 4K, Steady Video is not
available.
■ Save
Select data saving location (Terminal/SD card).
･
If the selected saving destination is low on memory, a
message appears and switches saving destination
temporarily (recording stops during video recording).
■ Exposure/WB
Set whether to display the icons for exposure correction (
white balance adjustment ( ) on the shooting screen.

◆ QR code reader

Scan QR code data and use it.
･
QR code cannot be scanned for some versions (type and
size).
･
Scratches, dirt, damages, low print quality and the strong
reflection of light may disable code reading.
❖
Reading with QR code reader
･
Scan using the camera with the distance of approximately
12 cm or more from an object (QR code).
･
If the QR code is not scanned well, try to change the distance
between the QR code and camera, the angle or direction of
camera.
1
From the Home screen, [Camera]
2
[MENU]→[QR code]
)/
The QR code shooting screen appears.
3
Display a QR code on the shooting screen→
Scan
A confirmation sound is played when scanning is
complete and the scanned data appears.
Scanning divided data :
One data item divided into multiple (up to 16) QR codes
can be scanned and be displayed as a combined data.
Continue reading if unscanned data exists.
Closing the QR code shooting screen :
･
Return to the previous shooting mode before setting to
Reading with QR code reader.
Turning the light ON/OFF :
OFF]
112
[←]
[MENU]→[Light ON]/[Light
Applications