Adjusting The Earpiece Volume During A Call; Turning On Manner Mode; Changing The Incoming Ring Tone - Fujitsu au F001 Basic Manual

One-ring Indicator
■
(Red) indicator on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
•
d: Decreases the volume.
•
Press c (OK).
➡

Turning On Manner Mode

When the standby screen is displayed, hold down
+ for at least one second.
This turns on manner mode, and displays
standby screen. This also turns on Answer memo, which is
indicated by on the standby screen.
Turning Off Manner Mode
■
When the standby screen is displayed, hold down + for
at least one second.
Turning off manner mode causes
standby screen. Answer memo is also turned off, which is
indicated by disappearing from the standby screen.
18

Changing the Incoming Ring Tone

When the standby screen is displayed, press c.
➡
➡
➡
➡
➡
on the
➡
➡
to disappear from the
➡
• Even in manner mode, the cell phone emits an
autofocus lock sound and shutter sound when you
take a photo.
Use a to select Function and then press
c (Select).
Use j to select Sound/Vib/Lamp and then
press c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select
(Ringtone) and then press
c (Select).
Use j to select Original and then press
c (Select).
Use j to select a ring tone and then press
c (Set).
The incoming ring tone is set.
If you press & (Play), the tone plays.
•
Press % (OK).