Emergency Mode - Fujitsu ARROWS NX F-01K Instruction Manual

◆ Screenshot
You can save a screen displayed on the terminal as an image.
･
Some screens may not be saved.
Press and hold P and the volume down key at
1
the same time (1 sec. or more)
Screen shot is saved and
･
To check the image, flick the status bar down to open
the Notification panel (→P52) and then tap the
notification of screenshot→Select the application, or
from the Home screen, tap [Album-Scene].

◆ Emergency mode

In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
Press and hold P until the phone options menu
1
appears
2
[Emergency mode]→[OK]
The terminal restarts and Emergency mode is set.
･
To cancel the setting, perform the same operations
again or from the Home screen for Emergency mode,
tap [Stop saving]→[OK].
✔INFORMATION
･
Alternatively, from the Home screen, tap
→[OK] for setting Emergency mode.
･
In Emergency mode, the setting is not canceled by turning
the power off.
appears on the status bar.
→[Disaster kit]→
◆ Application permissions
The first time you launch an application or function that
accesses other functions and information on the terminal, a
confirmation screen that requests authorization for access
rights appears. When you approve these access rights, the
corresponding functions and information become available to
the application or function.
･
Confirmation screens vary depending on the application or
function. Check the displayed content carefully and operate.
<Example> When launching "Album-Scene"
application for the first time
1
From the Home screen, [Album-Scene]
The confirmation screen is displayed.
2
[DENY]/[ALLOW]
Follow the on-screen instructions.
✔INFORMATION
･
If permission is not granted, some applications and functions
may not work, or use of the functions may be limited.
･
To change the permissions, from the Home screen,
[Settings]→[Display/Sound/Apps]→[Apps]→Tap the
application→[Permissions]→Turn ON/OFF permissions to
change.
40
→
Before using the terminal