Phone Memo - Fujitsu ARROWS NX F-01K Instruction Manual

Phone memo

Set phone memo or play/delete recorded phone memos.
･
Note that accepting a video call by phone memo
automatically changes it to a voice call and the image is not
recorded.
1
From the Home screen,
→[Phone memo]
2
Set required items
Enable phone memo : Set ON/OFF of Phone memo.
･
If number of saved phone memos exceeds the saving
limit, the terminal does not answer calls with Phone
memo even when the setting is enabled.
Phone memos : Display a list of recorded phone memos.
Select a phone memo→Tap
･
To delete a message, touch and hold a phone memo→
[1 memo delete]→[YES]. When a message notifying
that there is no phone memo is displayed, tap [OK].
･
To delete all the messages, in the phone memo list, tap
→[Delete all]→[YES]→[OK].
･
Up to 60 seconds per message and up to 10 messages
can be recorded for Phone memo.
Set answer time : Set a time to answer.
✔INFORMATION
･
When an incoming call is answered with Phone memo, the
guide message tells the caller that you cannot answer the call
right now and prompts to leave a message within 60 seconds
after beep tone.
→ →[Call settings]
to play the message.
Call settings
Make various settings for DOCOMO network services, call and
Internet call.
1
From the Home screen,
2
Set required items
Network service : The following DOCOMO network
services are available.
*1
Voicemail service
time, etc.
Call forwarding service
forwarding number, etc.
*1
Call waiting : Start/stop the service, or check the
settings.
Caller ID notification : Set notification or confirm settings.
Nuisance call blocking service : Register, remove, check
registered numbers or the Advanced settings.
Caller ID display request service : Start/stop service, or
check the settings.
Call notification : Start/stop the service, or check the
settings.
English guidance : Set or check the settings.
Remote operation settings : Start/stop the service, or
check the settings.
Public mode (power OFF) settings : Start/stop the service,
or check the settings.
Roaming settings : Setting steps→P184
Phone ringtone : Set phone ringtone.
73
→ →[Call settings]
: Start/stop the service, or set call
*1
: Start/stop the service, change
Phone