After Returning To Japan - Fujitsu ARROWS NX F-01K Instruction Manual

International prefix : Select the country code used in the
automatic conversion function.
◆ Network service (overseas)
Set the network services such as the voicemail service to use
overseas.
･
Activate "Remote operation settings" in advance.→P73
･
If you make the settings overseas, you are charged a call fee
to Japan from the country you stay.
･
The settings may not be made depending on overseas
network operator.
1
From the Home screen,
→[Roaming settings]→[Network service]
2
Select the service
Remote operation (charges apply) : Set whether to start
remote operation.
Caller ID notification request service (charges apply) : Set
to notify a caller with voice prompt to request caller ID
when receiving an anonymous call.
Incoming call notification while roaming (charges apply) :
→P184
Roaming guidance (charges apply) : →P184
Voicemail service (charges apply) : Set the terminal to
take a message from a caller while you are outside the
service area or you turn the terminal off. (Subscription is
required.)
Call forwarding service (charges apply) : Set the terminal
to forward a call to another terminal registered in
advance. (Subscription is required.)
3
Operate according to the onscreen instructions
→ →[Call settings]
185
4
Operate according to the voice guidance

After returning to Japan

When you return to Japan, the terminal is connected to
DOCOMO network automatically. If connection is failed,
perform the following operations.
･
Set [Network Mode] in [Cellular networks] to [4G/3G/GSM
(Auto)].→P182
･
Set [Network operators] in [Cellular networks] to [Select
automatically].→P182
Overseas use