Fujitsu ARROWS NX F-01K Instruction Manual page 174

◆ Sending or receiving data to or from
Bluetooth device
You can send data such as Album-Scene (→P113) and contacts
or receive data from a Bluetooth device.
･
Set a Bluetooth device to be connected or to be detectable in
advance.
<Example> Sending files in Album-Scene
1
Open Album-Scene and tap an image
2
→[Send]→[Bluetooth]→[OK]
･
When the image size selecting screen appears, tap
[Original size]/[Shrink image]→[OK].
3
Tap a Bluetooth device
Open the Notification panel to check if transmission is
completed.
<Example> Receiving files from a Bluetooth device
1
Send files from a Bluetooth device
2
After the file arrival is notified, open the
Notification panel→[Bluetooth Share:
Incoming file]→[ACCEPT]
･
To check the received files, open the Notification panel
and tap the notification of "Bluetooth Share: Received
files", or operate from the Home screen,
→[Wireless & networks]→[Bluetooth]→[MENU]→
[Show received files].
◆ Canceling connection with a Bluetooth
device
When a Bluetooth device such as an earphone microphone or
keyboard is connected, cancel it by the following operation.
1
From the Home screen,
[Wireless & networks]→[Bluetooth]
2
Tap the connected Bluetooth device→[OK]
◆ Unpairing from Bluetooth device
1
From the Home screen,
[Wireless & networks]→[Bluetooth]
2
Tap the button at the upper right of the screen
to turn [Bluetooth] to ON→
device→[FORGET]
◆ Renaming a Bluetooth device
1
From the Home screen,
[Wireless & networks]→[Bluetooth]
2
Tap the button at the upper right of the screen
to turn [Bluetooth] to ON→
→[Settings]
device→Enter a device name→[OK]
172
→[Settings]→
→[Settings]→
of the Bluetooth
→[Settings]→
of the Bluetooth
Data communication