Fujitsu ARROWS NX F-01K Instruction Manual page 104

◆ Recording a program
You can record image, sound, subtitle and data broadcasting
you are watching.
The maximum of 99 items can be recorded onto the terminal
and microSD card each. 1Seg cannot be saved onto microSD
card.
･
To change where to save the TV programs you record, go to
[FullSeg Recording setting].→P103
1
On the TV watching screen, tap TV watching
area
The controller appears.
2
(Start recording)
Recording starts.
3
On the TV watching screen, tap TV watching
area
4
(End recording)
Recording ends.
✔INFORMATION
･
To save a TV program to be recorded to a microSD card, use
the microSD card which is formatted in advance in the
terminal.→P144
･
To start recording, available terminal memory or microSD
card requires 38 MB or more for Full Seg or 1 MB or more for
1Seg. The remaining battery level requires 11% or more
(while charging, you can start recording regardless of the
battery level).
･
If the following occurs while recording Full Seg/1Seg,
recording automatically stops.
- Available space on the terminals memory or microSD card
is 19 MB or less for Full Seg and 0.5 MB or less for 1Seg
- Remaining battery is 10% or less
- 1Seg recording data size is 2 GB (approximately 600
minutes)
･
Recorded TV programs are saved as copyrighted data. It
cannot be attached to mail.
･
Record programs in a place where airwave condition is
stable. A program may not be recorded in a place where the
reception condition is unstable.
･
While recording, you cannot change channel or Full Seg/1Seg
watching mode.
･
Recording may not be performed normally when using the
function which requires a large amount of loading at the
same time.
･
If you use data communication services while recording, the
recording may not be performed normally because TV signal
strength becomes poor.
･
If you record a paid broadcast, copy-controlled program or
when you move to a different broadcast area, recording may
end halfway.
❖
Playing program
1
On the TV watching screen,
program list]
The list of recorded programs is displayed.
･
On the recorded program list, tap [DEVICE]/[MEMORY
CARD] to change the save location.
102
→[Recorded
Applications