◆ Setting Wi-Fi tethering
Change the settings as required.
・
By default, [F-01K_AP] is set for Network name, [WPA2 PSK
AES] is set for Security, and a random value is set for
[Password].
1
From the Home screen,
[Wireless & networks]→[More]→[Tethering]→
[Wi-Fi access point]
2
Enter a network name→Select security→Enter
a password→[SAVE]
・
Security can be set to [Open], [WEP64], [WEP128],
[WPA2 PSK AES] or [WPA/WPA2 PSK].
◆ Easy settings for Wi-Fi tethering
Register Wi-Fi device supporting WPS.
・
Set Wi-Fi tethering to ON in advance.
1
From the Home screen,
[Wireless & networks]→[More]→[Tethering]→
[Easy settings for Wi-Fi tethering]
2
[Push button system]/[PIN entry system]→Set
required items→On the registered screen, [OK]
・
For push button system, press a dedicated button on a
Wi-Fi device. For PIN entry system, enter PIN code
displayed on the Wi-Fi device and tap [OK].
→[Settings]→
→[Settings]→
134
◆ Bluetooth tethering
You can connect Bluetooth devices to the Internet.
・
Up to 4 Bluetooth devices can be connected at the same
time.
・
Pairing with Bluetooth devices is required in advance. →
P171
1
From the Home screen,
[Wireless & networks]→[More]→[Tethering]
2
Set [Bluetooth tethering] to ON
✔INFORMATION
・
For settings of the Bluetooth device, refer to the operation
manual of the Bluetooth device.
→[Settings]→
Settings