Operation During A Call - Fujitsu ARROWS NX F-01K Instruction Manual

◆ Receiving a video call
<Example> When a call is received in sleep mode
1
A call is received
The incoming call screen (full-screen) appears.
Press P/volume key to stop ringtone or vibration.
･
2
→[ACCEPT VIDEO]
Accepting with voice call :
Rejecting a call : →[REJECT]
Recording phone memo :
3
When a call is ended, [END CALL]
✔INFORMATION
･
When receiving a call while the Home screen is displayed or
application is activated, the incoming call screen is displayed
at the top of the screen. After you accept and end call, the
previous screen is displayed. Tap a caller's name or phone
number on the incoming call screen, the incoming call screen
(full-screen).
･
When you could not answer a call, notification icon (→P50)
appears on the status bar. Open the Notification panel (→
P52) to check missed calls, dial or send SMS.
･
With "Suguden setting" (→P74) set to ON, you can answer
incoming calls just by placing the terminal to your ear. It is
not available for video calls.
→[Accept voice]
→[Phone memo]

Operation during a call

The following operations are possible in the screen during a
call.
･
You can adjust call volume with the volume key while
dialing/during a call.
a
b
c
d
Voice call screen
a Name or phone number
b End call
c Show/hide the dialpad for dial input
Send touch-tone signals (DTMF tones).
d Set Mute to ON/OFF
･
Set Mute to ON to make your voice not be heard by the
other party.
e Call time
f Set speaker phone to ON/OFF
･
When connecting a Bluetooth device, tap to switch voice
output devices.
70
e
i
j
f
g k
h
b
Video call screen
e
d
h
Phone