docomo nano UIM card
A docomo nano UIM card is an IC card that stores user
information, such as the users phone number.
・
You can use the terminal only with a docomo nano UIM
card. If you have a docomo mini UIM card, docomo UIM
card, or FOMA card, bring it to a docomo Shop to replace it
with a docomo nano UIM card.
・
If docomo nano UIM card is not inserted to the terminal,
some functions such as making/receiving calls and sending/
receiving SMS are not available.
・
For details on the docomo nano UIM card, refer to the
instruction manual for docomo nano UIM card or NTT
DOCOMO website.
◆ Installing/Removing a docomo nano
UIM card
・
Install/remove after turning OFF the power.
・
Be sure to use the slot cap when inserting a docomo nano
UIM card. Inserting of a docomo nano UIM card alone may
cause a malfunction.
■ Installing
a Face the display side of the terminal up, put your fingertip
into the groove and then open the slot cap→P26
b Draw the slot cap in the direction of the arrow straight and
horizontally
・
The slot cap is designed to separate from the terminal.
c With the IC side facing down, set the docomo nano UIM
card into the slot cap
・
Check the orientation of card's corner.
・
Be sure to fit the docomo nano UIM card into the slot cap
so that it does not shift.
32
Corner cut
IC
Before using the terminal