Fujitsu ARROWS NX F-01K Instruction Manual page 165

◆ Exlider settings
Swipe the power key to scroll or zoom the screen.
1
From the Home screen,
tools]→[Exlider settings]
2
Set [Exlider operation] to ON
3
Set each item
･
Tap [Function description] to check how to use Exlider.
◆ Personal assist
Personal assist learns how you usually use the terminal, based
on information such as the location, time, and day of the week.
You can set up this feature to display a list of candidate
applications for your convenience.
･
Turn Personal assist on to allow it to start learning how you
usually use the terminal. When the learning process is
complete, Personal assist is displayed on the Home screen.
Note that it may take several days for the learning process to
be completed.
1
From the Home screen,
tools]→[Personal assist]
2
Set [Personal assist] to ON
･
Tap [Function description] to see detailed information
about Personal assist and instructions for using it.
3
Operate following onscreen instructions→
[START USING]
→[Settings]→[Useful
→[Settings]→[Useful
✔INFORMATION
･
Configure the following settings to use Personal assist more
comfortably. These settings will help identify your current
location with higher accuracy, thus providing more accurate
assistance. Also, you can use Wi-Fi to identify even an indoor
location where the GPS function does not work.
- Set [Location] to On and set [Mode] to [High accuracy]→
P118
- Set [Wi-Fi] to ON→P127
- From the Home screen,
Accounts]→[Location]→[MENU]→[Scanning]→Set [Wi-Fi
scanning] to ON
◆ Glove touch
Set whether to improve the sensitivity of the touch panel so
you can use touch gestures on the terminal with gloves on.
1
From the Home screen,
tools]
2
Mark/Unmark [Glove touch]
✔INFORMATION
･
Depending on the material of gloves, touch operation may be
difficult.
･
If the touch operation is difficult, tilt your fingers to bring the
pads of the fingers into contact with the touch panel when
operating the terminal.
･
If [Glove touch] is marked and you use touch operation
without wearing gloves, the terminal may perform
operations unintentionally.
163
→[Settings]→[Location/
→[Settings]→[Useful
Settings